TNM7000E 5 in 1 car programmer:

1.Universal programmer- supporting 25000 devices(flash NOR/NAND/SPI, Eeprom, MCU's, CPLD and EMMC).

2.ECU kit software: ECU. Immobilizer, dashboard programming through JTAG/ISP/BDM/GPT. OBD cable downloading.

3.ECU remap software: ECU tuning+ checksum calculation.

4.CAN analyzer software: for diagnosing CAR CAN-BUS problems and reverse engineering.

5.80 Msps/ 20 MHz -1 channel digital oscilloscope: optional accessory board +8 channel 200 Msps logic analyzer.

ECU KIT SOFTWARE:

Supporting OBD/JTAG/ISP programming of Bosch, Delphi, Continental, Siemens, Denso, Mitsubishi, Valeo, Sagem, Magneti Marelli and many other units with wiring diagram and checksum calculation. Support of most MCUs used in car ECUs, Immobilizers, BCM, UCH, ABS, Airbag including:

Full Motorola(Freescale) 9S12 series with unsecure capability/ Infineon Tricore TC17xx series with password reading for many ECU's/ Hitachi SH705x read and write/ Full Microchip PIC and DSPIC support/ full Atmel microcontrollers support/ NXP PCF79xx remote chips/ Renesas R5F10Dxx(Secured Eeprom read and write)/ NEC upd70F3xxx series support/ Infineon XC233x, XC236x MCUs used in Airbags/ Fujutsu MB91F06x and MB91F5xx MCUs used in Dashboards.

ISP Protocols: Tricore boot/ Bosch EDC17/ ME17/ MED17/ MEDG17 GPT(without ECU opening)/ Continental Tricore SSM mode(Simos PCR2.1)/ ST10F boot mode(Kline and ISP)/ Motorola BDM with 9S12 glitch security removal capability/ Denso 76F00xx NBD/ MPC%XX BDM/ JTAG MPC5XXX/ JTAG SPC56xx/ Mitsubishi Boot/ NEC MBUS.

OBD Downloader and Reading with Checksum calculation:

-Bosch: BoschMe7/ boschM7.8/ BoschMe7.9.7/ Bosch Me17 China/ Bosch Me17.9.7/ Bosch EDC17C53/ Bosch EDC17C39/ BoschMe7.4.5(Flash and EEprom)/ Bosch M7.4.4/ Bosch M7.4.9/ Bosch M7.4.11/ Bike Bosch MSE3/ MSE6.

 -Delphi: Delphi CRD2.35/ Delphi MT86/ Delphi MT38/ Delphi MT60/ Delphi MT80/ Delphi MT62.1/ Delphi MT22.3/Delphi MT22/ Delphi MT22.1/ Delphi MT20U2/ Delphi MT05-1/ Delphi MT05-2.

 -Continental: Hyunday and Kia Sim2K-141/ Sim2K-24x/ Sim2K-34x/ Renault EMS3132(Flash and EEprom)/ EMS3134.

-Mitsubishi: Mazda3/6(E6T6xxxx), Mazda3(E6T5xxx)

-SAGEM: Renault S3000/ Peugeot S2000

 -Valeo: Peugeot PL4/ J34/ J35

 -Magneti Marelli: 9GC-9H5

 Remap and ECU tuning: Remap Tables and 2D 3D views+ checksum calculation.

Free software update. Windows XP/VISTA/7/8/10(32,64) support.

Programmer software:

25000 supported devices, flash memory(Parallel/ Nand/ Serial), EPROM, EEPROM, Serial EEPROM, Microcontroller, NVRAM, FRAM, CPLD, PLD).

 •48-Pins ZIF Socket with pin continuity tester and 10- pins ISP/JTAG connector.

•USB 2.0 High Speed, read EMMC/Nand flashes with 12 Mbyte/sec, reading serial flash memory with 8 Mbit/sec.

•Auto detection of all flash Memories/ Microcontrollers with device ID.

•Multiple programming is possible by attaching 2 or more programmers to one PC.

•Low cost adaptors, works with many different adaptors from other programmers.